Audio Technica AT-LPW40WN Manual Turntable


Price:
Sale price$649

Description

Audio Technica AT-LPW40WN Manual Turntable. Fully Manual Belt-Drive Turntable. Stylish Walnut. No Compromise. 

At a glance:

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminium platter with rubber mat
  • No pre-amplifier required! AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
  • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. 

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. 

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Specifications: 

Type
2-speed, fully manual operation

Motor
DC servo motor w/speed stability control

Drive Method
Belt drive

Speeds
33-1/3 RPM, 45 RPM

Turntable Platter
Die-cast aluminium

Wow and Flutter
0.15% (WTD) @ 3 kHz (JIS)

Signal-to-Noise Ratio
>60dB

Output Level
Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain
35 dB nominal, RIAA equalized

Power Supply Requirements
100-240V AC, 60 Hz

Power Consumption
1 W

Dimensions
420.0mm W x 340.0mm D x 116.9mm H

Weight
4.7kg

Accessories Included
AT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter

Tonearm type
Balanced straight tonearm with detachable headshell

Effective arm length
223.6mm

Overhang
18.6mm

Tracking error angle
<2 degrees

Applicable cartridge weight
12-17g

Anti-skating range
0-3g

Replacement Stylus
AT-VMN95E

You may also like

Recently viewed